Product Description
0.6L CO2 Aluminum Cylinder with Euro Certificate
Main Feature:
Model:AL06
Name: Soda CO2 cylinder
Material: seamless aluminium alloy
Gas type : CO2
Color: Silver
Type: Soda co2 tank
Water Capacity: 0.6L
Working Pressure: 150bar
Test Pressure: 225bar
Cylinders are made from high strength Aluminum Alloy 6061, reliable in durability, fracture toughness and resistance to tearing and cracking.
Highly corrosion-resistant interior and exterior-ideal for wet gases.
Cylinders perform well at low temperatures.
Lightweight–up to 40 percent lighter than comparable steel cylinders and in Consistent weight, consistent thickness resist damage.
Brushed external surface provides a low-maintenance finish.
Cylinders meet or exceed all regulatory standards worldwide.
Cylinders cycle-tested in excess of 120,000 cycles at service pressure. Excess of 12000 cycles at test pressure.
Minimum burst pressure tested to 2.5 times service pressure without failure.
* Valve & Threads can be specified & installed CHINAMFG Request.
* Standard Finishing is RAL300 Red Powder Coated.
* Markings according to Standard Specifications, Additional Markings Available Ipon Request.
certificate:
specification:
| Type | (mm) Outside Diameter |
(L) Water Capacity |
(mm) Height (Withoutvalve) |
(Kg) Weight(Without valve,cap) |
(Mpa) Working Pressure |
(mm) Design Wall Thickness |
| LW-60-0.5-20H | 60 | 0.5 | 285 | 0.6 | 200 | 3.1 |
| LW-75-0.7-15H | 75 | 0.7 | 295 | 0.9 | 150 | 4 |
| LW-82-0.7-15H | 82 | 0.7 | 235 | 0.9 | 150 | 4.2 |
| LW-89-1.0-15H | 89 | 1.0 | 269 | 1.2 | 150 | 4.5 |
| LW-89-1.4-15H | 89 | 1.4 | 345 | 1.4 | 150 | 4.5 |
| LW-108-1.0-15H | 108 | 1.0 | 210 | 1.3 | 150 | 5.5 |
| LW-108-1.4-15H | 108 | 1.4 | 264 | 1.6 | 150 | 5.5 |
| LW-108-2.0-15H | 108 | 2.0 | 346 | 2.1 | 150 | 5.5 |
| LW-108-2.5-15H | 108 | 2.5 | 413 | 2.5 | 150 | 5.5 |
| LW-120-2.0-15H | 120 | 2.0 | 320 | 2.7 | 150 | 6.1 |
| LW-120-2.5-15H | 120 | 2.5 | 369 | 3.0 | 150 | 6.1 |
| LW-120-2.8-15H | 120 | 2.8 | 398 | 3.2 | 150 | 6.1 |
| LW-120-3.2-15H | 120 | 3.2 | 437 | 3.5 | 150 | 6.1 |
| LW-140-4.0-15H | 140 | 4.0 | 420 | 4.2 | 150 | 7.1 |
| LW-140-5.0-15H | 140 | 5.0 | 500 | 4.9 | 150 | 7.1 |
| LW-140-6.0-15H | 140 | 6.0 | 580 | 5.6 | 150 | 7.1 |
| LW-140-8.0-15H | 140 | 8.0 | 741 | 7.2 | 150 | 7.1 |
| LW-140-5.0-20H | 140 | 5.0 | 525 | 6.3 | 200 | 9.3 |
| LW-140-6.0-20H | 140 | 6.0 | 652 | 7.98 | 200 | 9.3 |
| LW-159-10.0-15H | 159 | 10.0 | 730 | 8.8 | 150 | 8 |
| LW-184-9.0-20H | 184 | 9.0 | 575 | 12.0 | 200 | 12.2 |
| LW-184-10.0-20H | 184 | 10.0 | 620 | 12.9 | 200 | 12.2 |
| LW-184-11.0-20H | 184 | 11.0 | 665 | 14.2 | 200 | 12.2 |
| LW-184-12.0-20H | 184 | 12.0 | 710 | 15.4 | 200 | 12.2 |
| LW-203-12-15H | 203 | 12.0 | 567 | 11.8 | 150 | 10.3 |
| LW-203-15-15H | 203 | 20.0 | 873 | 17.0 | 150 | 10.3 |
| LW-203-21.3-15H | 203 | 21.3 | 962 | 19.9 | 150 | 10.3 |
| LW-204-12-20H | 204 | 12.0 | 610 | 16.5 | 200 | 13.4 |
| LW-204-15-20H | 204 | 15.0 | 735 | 18.7 | 200 | 13.4 |
| LW-204-20-20H | 204 | 20.0 | 940 | 23.4 | 200 | 13.4 |
| LW-232-29.5-15H | 232 | 29.5 | 994 | 30.2 | 150 | 11.7 |
| LW-232-30.3-15H | 232 | 30.0 | 1571 | 30.5 | 150 | 11.7 |
| LW-232-33.4-15H | 232 | 33.4 | 1126 | 31.3 | 150 | 11.7 |
| LW-232-40.0-15H | 232 | 40.0 | 1340 | 36.5 | 150 | 11.7 |
| LW-232-20.0-20H | 232 | 20.0 | 750 | 26.9 | 200 | 15.4 |
| LW-232-26.0-20H | 232 | 26.0 | 921 | 30.7 | 200 | 15.4 |
| LW-232-30.0-20H | 232 | 30.0 | 1076 | 36.4 | 200 | 15.4 |
| LW-232-31.5-20H | 232 | 31.5 | 1096 | 38.0 | 200 | 15.4 |
| LW-232-40.0-20H | 232 | 40.0 | 1365 | 44.1 | 200 | 15.4 |
| LW-250-40.0-15H | 250 | 40.0 | 1150 | 36.7 | 150 | 12.6 |
| LW-250-46.4-15H | 250 | 46.4 | 1305 | 38.7 | 150 | 12.6 |
| LW-250-47.5-15H | 250 | 47.5 | 1340 | 42.0 | 150 | 12.6 |
| LW-250-50.0-15H | 250 | 50.0 | 1590 | 39.0 | 200 | 12.6 |
| LW-250-40.0-20H | 250 | 40.0 | 1227 | 46.3 | 200 | 16.5 |
| LW-250-50.0-20H | 250 | 50.0 | 1500 | 56.0 | 200 | 16. |
Company profile:
Our factory aluminium jar-making co.,ltd. is a professional filter capacitor shell aluminum shell and the development and production of a wholly-owned enterprise. Founded in 1988, now covers an area of 80,000 square meters, staff 320 people, including engineers and technicians 25 people. Since its inception, that is fully committed to the manufacture of aluminum cans , aluminum semi-finished products processing and metallurgy and processing such as special-shaped parts, with a strong technical force and good quality staff, and constantly develop new products, develop new markets,
Growing scale of production. Products not only meet the domestic demand, but also exported to Europe, America and Southeast Asia regions, well received by customers and vendors praise!
Company’s existing 3 series of products, Capacitor aluminum shell and cover, fuel filter housing and shelters, EFI pump casing. The company pays great attention to product quality, strictly follow the concept of lean production and methods of management of production. And has achieved ISO9001:2008quality system.certification.ISO14001:2004, EN ISO7866:2012+AC2014 environmental management system certification and ISO/TS16949: 2009auto parts industry certification.
The company in line to provide customers with the fastest, most comprehensive and efficient services for the purpose, sincerely welcome friends home and abroad to write to.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Function: | Cream Charger |
|---|---|
| Application: | Gas |
| Material: | Aluminum Alloy |
| Storage Medium: | Food Grade CO2 |
| Capacity: | 0.6L |
| Size: | 60mm*332mm |
| Customization: |
Available
|
|
|---|
How do manufacturers ensure the durability and reliability of hydraulic cylinders?
Manufacturers employ various strategies and techniques to ensure the durability and reliability of hydraulic cylinders. These measures are crucial as hydraulic cylinders are often subjected to demanding operating conditions and heavy loads. To ensure their longevity and dependable performance, manufacturers focus on the following aspects:
1. High-Quality Materials:
– Manufacturers use high-quality materials in the construction of hydraulic cylinders. Components such as cylinder barrels, piston rods, seals, and bearings are made from materials that possess excellent strength, corrosion resistance, and wear resistance properties. Common materials used include high-grade steel alloys, chrome-plated rods, and specialized coatings. The selection of appropriate materials ensures that hydraulic cylinders can withstand the stresses, pressures, and environmental conditions they encounter during operation.
2. Robust Design:
– Hydraulic cylinders are designed to withstand high loads and harsh operating conditions. Manufacturers use computer-aided design (CAD) software and finite element analysis (FEA) techniques to optimize the cylinder’s structural integrity and performance. The design includes factors such as proper wall thickness, reinforcement in critical areas, and appropriate sizing of components. Robust design practices ensure that hydraulic cylinders can withstand the forces and stresses they encounter, preventing premature failure and ensuring durability.
3. Quality Manufacturing Processes:
– Manufacturers follow stringent quality control measures during the manufacturing processes of hydraulic cylinders. These processes include precision machining, welding, heat treatment, and surface finishing. Skilled technicians and advanced machinery are employed to ensure dimensional accuracy, proper fitment of components, and overall quality. By adhering to strict manufacturing processes and quality standards, manufacturers can produce hydraulic cylinders with consistent performance and reliability.
4. Sealing Technology:
– The sealing system of hydraulic cylinders is critical for their durability and reliability. Manufacturers utilize advanced sealing technologies such as lip seals, O-rings, and composite seals to prevent fluid leakage and ingress of contaminants. Properly designed and high-quality seals ensure that hydraulic cylinders can maintain their performance over extended periods. Seals are tested for their compatibility with the hydraulic fluid, pressure resistance, and resilience to environmental factors such as temperature and humidity.
5. Performance Testing:
– Manufacturers subject hydraulic cylinders to rigorous performance testing to validate their durability and reliability. These tests simulate real-world operating conditions and evaluate factors such as load capacity, pressure resistance, fatigue life, and leakage. Performance testing helps identify any design flaws or weaknesses in the hydraulic cylinder and allows manufacturers to make necessary improvements. By conducting thorough performance testing, manufacturers can ensure that hydraulic cylinders meet or exceed the required performance standards.
6. Compliance with Industry Standards:
– Manufacturers adhere to industry standards and regulations to ensure the durability and reliability of hydraulic cylinders. These standards, such as ISO 6020/6022 and NFPA T3.6.7, provide guidelines for design, manufacturing, and performance requirements. By following these standards, manufacturers ensure that hydraulic cylinders are designed and built to meet specific quality and safety criteria. Compliance with industry standards helps establish a baseline for durability and reliability and instills confidence in the performance of hydraulic cylinders.
7. Regular Maintenance and Service:
– Manufacturers provide recommendations for regular maintenance and service of hydraulic cylinders. This includes guidelines for lubrication, inspection of components, and replacement of wear parts such as seals and bearings. Following the manufacturer’s maintenance guidelines helps ensure the long-term durability and reliability of hydraulic cylinders. Regular maintenance also allows for the early detection of potential issues, preventing major failures and extending the service life of the hydraulic cylinders.
8. Customer Support and Warranty:
– Manufacturers provide customer support and warranty services to address any issues that arise with hydraulic cylinders. They offer technical assistance, troubleshooting guidance, and replacement of defective components. The warranty ensures that customers receive reliable and durable hydraulic cylinders and provides recourse in case of any manufacturing defects or premature failures. Strong customer support and warranty policies reflect the manufacturer’s commitment to the durability and reliability of their products.
In summary, manufacturers ensure the durability and reliability of hydraulic cylinders through the use of high-quality materials, robust design practices, stringent manufacturing processes, advanced sealing technology, thorough performance testing, compliance with industry standards, regular maintenance guidelines, and customer support with warranty services. By focusing on these aspects, manufacturers can produce hydraulic cylinders that can withstand demanding conditions, provide long service life, and deliver reliable performance in various applications.
Advancements in Hydraulic Cylinder Technology Improving Corrosion Resistance
Advancements in hydraulic cylinder technology have led to significant improvements in corrosion resistance. Corrosion is a major concern in hydraulic systems, especially in environments where cylinders are exposed to moisture, chemicals, or corrosive agents. These advancements aim to enhance the durability and longevity of hydraulic cylinders. Let’s explore some of the key advancements in hydraulic cylinder technology that have improved corrosion resistance:
- Corrosion-Resistant Materials: The use of corrosion-resistant materials is a fundamental advancement in hydraulic cylinder technology. Stainless steel, for example, offers excellent resistance to corrosion, making it a popular choice in marine, offshore, and other corrosive environments. Additionally, advancements in metallurgy have led to the development of specialized alloys and coatings that provide enhanced corrosion resistance, extending the lifespan of hydraulic cylinders.
- Surface Treatments and Coatings: Various surface treatments and coatings have been developed to protect hydraulic cylinders from corrosion. These treatments can include electroplating, galvanizing, powder coating, and specialized corrosion-resistant coatings. These coatings create a barrier between the cylinder surface and corrosive elements, preventing direct contact and inhibiting the onset of corrosion. The selection of appropriate coatings depends on the specific application and environmental conditions.
- Sealing Technology: Effective sealing systems are crucial in preventing water, moisture, and contaminants from entering the cylinder and causing corrosion. Advancements in sealing technology have led to the development of high-quality seals and advanced sealing designs that offer superior resistance to corrosion. These seals are typically made from materials specifically engineered to withstand corrosive environments, ensuring long-term sealing performance and minimizing the risk of corrosion-related issues.
- Improved Surface Finishes: The surface finish of hydraulic cylinders plays a role in their resistance to corrosion. Advancements in machining and polishing techniques have allowed for smoother and more uniform surface finishes. Smoother surfaces reduce the likelihood of corrosion initiation and make it easier to clean and maintain hydraulic cylinders. Additionally, specialized finishes, such as passivation or chemical treatments, can be applied to further enhance corrosion resistance.
- Environmental Protection Features: Hydraulic cylinders can be equipped with additional features to protect against corrosion. These features may include protective boots, bellows, or shields that guard vulnerable areas from exposure to corrosive agents. By incorporating these protective elements into the design, hydraulic cylinders can withstand harsh environments and minimize the risk of corrosion-related damage.
In summary, advancements in hydraulic cylinder technology have significantly improved corrosion resistance. The use of corrosion-resistant materials, advanced surface treatments and coatings, innovative sealing technology, improved surface finishes, and the incorporation of environmental protection features have all contributed to enhanced durability and longevity of hydraulic cylinders in corrosive environments. These advancements ensure reliable performance and reduce the maintenance and replacement costs associated with corrosion-related issues.
Can hydraulic cylinders be adapted for use in both industrial and mobile equipment?
Yes, hydraulic cylinders can be adapted for use in both industrial and mobile equipment. The versatility and adaptability of hydraulic systems make them suitable for a wide range of applications across various industries. Here’s a detailed explanation:
1. Industrial Equipment:
– Hydraulic cylinders are extensively used in industrial equipment such as manufacturing machinery, construction equipment, material handling systems, and heavy-duty machinery. They provide the necessary force and controlled movement for tasks such as lifting, pushing, pulling, and positioning heavy loads. Industrial hydraulic cylinders are typically designed for robustness, durability, and high load-bearing capacities to withstand the demanding environments and heavy-duty applications encountered in industries.
2. Mobile Equipment:
– Hydraulic cylinders are also widely adopted in mobile equipment, including agricultural machinery, mining equipment, forestry machinery, and transportation vehicles. These cylinders enable various functions such as tilting, lifting, steering, and stabilizing. Mobile hydraulic cylinders are designed to be compact, lightweight, and efficient to meet the specific requirements of mobile applications. They are often integrated into hydraulic systems that power multiple functions in a single machine.
3. Adaptability:
– One of the key advantages of hydraulic cylinders is their adaptability. They can be customized and configured to suit different operating conditions, equipment sizes, load capacities, and speed requirements. Hydraulic cylinder manufacturers offer a wide range of sizes, stroke lengths, mounting options, and rod configurations to accommodate diverse applications. This adaptability allows hydraulic cylinders to be utilized in both industrial and mobile equipment, serving various purposes across different sectors.
4. Mounting Options:
– Hydraulic cylinders can be adapted to different mounting arrangements to suit the specific requirements of industrial and mobile equipment. They can be mounted in various orientations, including vertical, horizontal, or at an angle. Different mounting options, such as flange mounts, trunnion mounts, and clevis mounts, provide flexibility in integrating hydraulic cylinders into different equipment designs.
5. Integration with Hydraulic Systems:
– Hydraulic cylinders are often part of a larger hydraulic system that includes components such as pumps, valves, hoses, and reservoirs. These systems can be tailored to meet the specific needs of both industrial and mobile equipment. The hydraulic system’s design and configuration can be adapted to provide the necessary flow rates, pressures, and control mechanisms required for optimal performance in the intended application.
6. Control and Automation:
– Hydraulic cylinders in both industrial and mobile equipment can be integrated with control systems and automation technologies. This allows for precise and automated control of the cylinder’s movement and function. Proportional control valves, sensors, and electronic controls can be incorporated to achieve accurate positioning, speed control, and synchronization of multiple hydraulic cylinders, enhancing overall equipment performance and productivity.
7. Safety Considerations:
– Hydraulic cylinders for both industrial and mobile equipment are designed with safety in mind. They often feature built-in safety mechanisms such as overload protection, pressure relief valves, and emergency stop systems to prevent accidents and equipment damage. Safety standards and regulations specific to each industry are taken into account during the design and adaptation of hydraulic cylinders for different applications.
Overall, hydraulic cylinders offer the adaptability and performance required for use in both industrial and mobile equipment. Their versatility, customizable features, mounting options, integration capabilities, and safety considerations make them suitable for a wide range of applications across diverse industries. Whether it’s heavy-duty industrial machinery or mobile equipment operating in challenging environments, hydraulic cylinders can be adapted to meet the specific needs and requirements of various equipment types.
editor by CX 2023-12-25